Tint Tech
Tint Tech is a specialized window lamination company. We have a wide range of window film and other products that are sourced from multiple manufacturers worldwide.
From inception, we constantly strive to ensure that we always have our hands on the best products.
Because we communicate with the world’s best manufacturers we are always at the front of the technology spectrum and will always have the best products to offer for almost every application and demand.
Tint Tech ensures that all the requirements of quality and quantity are met. At Tint Tech we comply with international quality standards such as ISO 9001 and UKAS quality management control.
These quality control standards have been set by SGS.
The management at Tint Tech has over 16 years of experience in the motor trade.
We have managed to gain a large market share due to our ability to market ourselves with our large sales contingent as well as the fact that we believe that our customers are our number one
priority.
Our Work
At Tint Tech we cater to the following market requirements;
Smash and Grab safety film for the auto trade and;
various heat & sun resistant films for the architectural industry.
Our products are branded as follows:
Tech 100 is a product specifically developed to prevent smash-and-grab attacks on vehicles.
It also prevents flying shards in a building in the event of an explosion of forced entry.
Tech 100 is a 100-micron film.
Supershade is a basic 39-micron organic film used for the back windscreen of a motor vehicle.
It is highly durable, easy to mold to the contours of a windscreen, and is a fitter’s product of choice.
The warranty of Supershade is five years.
The end user will never have to worry about pealing, pulling, bubbling, and fading.
Quality Control
Tint Tech is manufactured according to ISO 9001 and UKAS quality control management. These quality control systems were started by a company called SGS in the United Kingdom.
All countries worldwide that are reputable subscribe to SGS in order to achieve ISO 9001 manufacturing standards.
If a company does not subscribe to SGS they have very little credibility in the market in which they manufacture goods. Their goods are very often seen as below standard.
Not only does SGS give the manufacturer annual inspections and quality control systems, but they also give minimum standards for product production, i.e.; If you see the ISO 9001-2000 symbol it indicates that one can expect the very best from those products
The following tests are performed on our products
1.1 This test method covers the determination of the coefficients of starting and sliding friction of plastic film and sheeting when sliding over
itself or other substances at specified test conditions. The procedure permits the use of a stationary sled with a moving plane or a
moving sled with a stationary plane. Both procedures yield the same coefficients of friction values for a given sample.
Note 1–For the frictional characteristics of plastic films partially wrapped around a cylinder, or capstan, see Test Method G143 under the
jurisdiction of ASTM Subcommittee G02.50.
1.2 Test data obtained by this test method is relevant and appropriate for use in engineering design.
1.2.1 As an option for this test, the coefficient of friction may be run at temperatures other than 23C by heating only the plane while the sled
is at ambient temperature.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user
of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior
to use.
1.1 This test method covers the measurement of the wetting tension of a polyethylene or Polypropylene film surface in contact with drops of specific test solutions in the presence of air.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use
1.1 This test method covers the determination of the tensile properties of plastics in the form of thin sheeting, including film.
1.2 Note 1 – Film has been arbitrarily defined as sheeting having nominal thickness not greater than 0.25 mm (0.010 in.).
Note 2 – Tensile properties of plastics 1.0 mm (0.04 in.) or greater in thickness shall be determined according to Test Method D638.
1.2 This test method may be used to test all plastics within the thickness range described and the capacity of the machine employed.
1.2.1 Static Weighing, Constant-Rate-of-Grip Separation Test – This test method employs a constant rate of separation of the grips
holding the ends of the test specimen.
1.3 Specimen extension may be measured in these test methods by grip separation, extension indicators, or displacement of gage marks.
1.4 A procedure for determining the tensile modulus of elasticity is included at one strain rate
Note 3 – The modulus determination is generally based on the use of grip separation as a measure of extension; however, the desirability of using extensometers, as described in 5.2, is recognized and provision for the use of such instrumentation is incorporated into the procedure.
1.5 Test data obtained by this test method is relevant and appropriate for use in engineering design.
1.6 The values stated in SI units are to be regarded as the standard. The values in parentheses are provided for information only.
This test method is particularly applicable to no rigid thermoplastic sheeting or film made by the calendar or extrusion process.
The test gives an indication of lot-to-lot uniformity as regards the degree of internal strains introduced during processing.
The heating medium in this test method is air and may not yield the same results as Test Method D2732, which uses a liquid medium.
Before proceeding with this test method, reference should be made to the specification of the material being tested.
Any test specimen preparation, conditioning, dimensions, or testing parameters, or a combination thereof, covered in the relevant ASTM material specification shall take precedence over those mentioned in this test method. If there are no relevant ASTM material specifications, then the default conditions apply.
Table 1 of Classification System D 4000 lists the ASTM material standards that currently exist.
1.1 This test method covers the measurement of changes in linear dimensions of no rigid thermoplastic sheeting or film that result from exposure of the material to specified conditions of elevated temperature and time.
1.2 The values stated in SI units are to be regarded as the standard.
1.1 This test method covers the evaluation of specific light-transmitting and wide-angle-light scattering properties of planar sections of materials such as essentially transparent plastic. Two procedures are provided for the measurement of luminous transmittance and
haze.
Procedure A uses a haze meter as described in Section and Procedure B uses a spectrophotometer as described in Section Material having a haze value greater than 30% is considered diffusing and should be tested in accordance with Practice E 167.
1.2 The values stated in SI units are to be regarded as standard.
Note 1 For greater discrimination among materials that scatter a high percent of the light within a narrow forward angle, such as is the case with abraded transparent plastics, adjust the haze meter and perform measurements in accordance with Test Method D 1044 All the above tests conform to the same standards adopted by the SABS in evaluating and testing window film products.
For more information on these tests, please feel free to contact us.
Sign Tech
With sign tech, we can provide a simple Chromadek sign to a lightbox to a full digital kiosk
With our remote marketing services. We can provide and change advertising to all your branches nationwide from our hub in Johannesburg.
Our Work
Design, build and deploy your Kiosk
Our platform is built on GPU processing, so you can expect the same beautiful smooth experience that your audience has grown accustomed to, just like any native iPad or Android app.
Because we support all your favorite devices, including Windows, iPad, and Android, your kiosk solution is future-proof!
Vehicle Vinyl Wrap
Corporate vehicle branding and car wraps are the most affordable way to market and advertise your business.
Whatever your budget may be, CarWraps has a solution for your business. Looking for just a company logo on the doors or a complete car wrap, your options are endless.
At Sign Tech we pride ourselves on the fact that we only use a combination of materials we trust and highly skilled professionals with over 15 years of experience to carry out your selected service.
FROSTED DECALS
Frosted vinyl is an opal-etched glass effect ideal for glass manifestation.
This self-adhesive window film is versatile and can be used to create effects by either decal-cutting or printing on the material. Also used for total-coverage architectural applications.
We also do
Side Window Replacement And Windscreen Chip Repair
The longer a stone chip is left in a windscreen, the more likely it is that it will develop into a crack. So it’s very important to repair a chip as soon as possible.
If your windscreen is chipped or cracked, we recommend replacing the whole windscreen. A replacement will ensure safety in your vehicle, and avoid you having to worry about the crack getting bigger. Damaged screens are not safe; instead restore stability with replacing it.
The windscreen provides the vehicle with protection in case of an accident. A quality windscreen will prevent the vehicle from crumbling in the case of an accident where the car rolls over. Even a small chip will make the vehicle vulnerable to greater damage.
Yes. we accept all forms of payment. This includes credit and debit cards, and cash. If your insurance policy does not cover the cost of the windscreen repair, our team can help you. We provide affordable services that last so you can rest assured this decision is a good investment to make.
We also do
Full venue monthly takeovers where we help owners or managers with the running of their venues month to month with stock take, menus, events, buying rights, staff, and sponsorship for events